| We have an
extensive range of Microfinishing Machines and the machines
displayed in this page are only some of our range. Please
contact us
for more information.
Superfinishing Attachments (Attached
to Lathe / Turning Machines)
Features:
- Standard width (100mm and 200mm) available.
- Unit will be attached onto Lathe / Turning machine
for superfinishing process.
- Easy setup
- Reliable result obtainable.
- Low cost attachment
 |
Model: MP100
Working width up to 100mm |
|
 |
| Automatic
plunge centreless microfinishing machine
Features:
- for finishing piston pins, cam follower rollers,
piston rods etc.
- Input finish: Ground to 0.2 Ra to 0.4 Ra
- Output finish: 0.04 - 0.08 Ra
- Production: 60 to 80 pcs/hr. depending on input condition
 |
Model: L 012
For Pistons pins, cam follower rollers, piston rods
etc. |
|
|
| Centreless
Microfinishing Machine with roller supports & auxiliary
drives.
Features:
- Used for: Microfinishing of rolls of rolling mill.
- Job size: Diameter 25mm to 150mm & length up to
2M
- Input Finish: 0.3 u Ra
- Output Finish: 0.025 u Ra
- Other applications: Hydraulic Cylinder Pistons Rods,
Shock Absorber front Fork Tubes
& Piston Rods, Piston Pins, Crank Pins, Gudgeon
Pins Printer Axles
 |
| Model: CMP-100-1H |
|
|
| Machines
For Microfinishing of Transmission Shafts, Main Shafts
Features:
- CNC Microfinisher with 600 mm
- admit between centres
- Improved bearing / oil seal life
- Better sealing
- Reduced noise level
 |
Model: L 005
Microfinishing of Transmission & Main Shafts |
|
|
Machines
For Microfinishing of Engines and Gearbox Parts
 |
| Model: L 013 |
|
|
| Microfinishing
of Hydraulic Pistons
Features:
- Admit between Centre : 2,850 mm MAX,. 400 mm MIN.
- Machine Control : CNC
- Input Finish : 0.4 m Ra
- Output Finish : 0.05 m Ra
 |
Model : L 004
Microfinishing of Hydraulic Pistons |
|
|
| Microfinishing
of Pump Shaft, Gear Shafts
Features:
- For microfinishing of bearing diameters and thrust
face of Pump shafts, Gear shafts etc.
- Input finish: 0.4 Ra
- Output finish: Below 0.15 Ra
- Productivity: 60 to 80 components/hour
- Achieve finish below 0.05 Ra by using diamond lapping
films
 |
Model: M 010
Microfinishing of pump shaft and gear shafts. |
|
|
| Machine
for microfinishing Camshafts
Features:
- Admit between center : 600 mm
- Controls : CNC
Example Case Study:
Using model 1540 GBQ-CNC
Component: Camshaft
Camlobe Finishing: With stone
Bearing & Oil Seal: With film backed abrasive
It is shuttle SPM with 4 tape finishing arms at station
I and 4 stone finishing arms at station II.
| |
Input |
Output |
| Ra |
0.4 |
0.2 |
| Rk |
0.5 to 1.3 |
0.4 to 0.9 |
| Wt |
0.9 to 5.0 |
0.5 to 1 |
| Wz |
1.6 to 3 |
1.2 to 1.6 |
Cycle Time
176 seconds total for 5 journals, 1 oil seal diameter
and 8 camlobes
 |
| Model: 1540
GBQ-CNC |
|
|
| Microfinishing
of Motorcycle Camshaft
Features:
- Admit between center: 100mm
- Input : 2.5 Rp MAX
- Output : Below 1 Rp
- Productivity : 120 parts / hour
- Reduced friction & noise level
- Removes chatter marks of grinding
- Improves lobe merging at nose & flat area
 |
Model: GBQ-CAM
Microfinishing of Motorcycle Camshaft. |
|
|
| Machines
For Microfinishing of Crankshafts
Features:
- Component : rankshaft with 3pins & 4 journals
- Admit between centers : 400 mm, 600 mm, 1000 mm
- Machine controls : CNC Machine tooled up with one
arm for pin and one arm for journal (Can take up to
8 arms in one arm pack)
- Production : 12 to 20 parts per hour
 |
Model: 140
GBQ-CNC
Cycle Time: 300 seconds for finishing 3 pins &
4 journals |
|
|
| Machines
for Microfinishing of Steering Rack Bars
Features:
- Automatic machine for microfinishing cylindrical area
& behind rack bar teeth
- Input: 0.8 uRa
- Output: 0.3 uRa
- Production: 60 to 80 parts / hour
- Benefits: Smooth running in bush
 |
Model: RBSM
Microfinishing of Steering Rack Bars |
|
